Seven Causes of a Door Catching on the Frame

A DW Locksmiths guide. Published 19 November 2026.

Would you rather a locksmith sorted it? DW Locksmiths repairs door, lock and window faults across Houghton-le-Spring, Sunderland, Durham and surrounding areas. No call-out fee, and the price is agreed before work starts.

Quick Summary

A door catching on the frame usually comes down to one of seven causes: loose or worn hinge screws, worn or bent hinges, a sagging door, door and frame misalignment, seasonal swelling, latch and strike plate problems, or uPVC door alignment and dropped mechanisms. Check for shiny rub marks and uneven gaps to pinpoint which cause you have before adjusting anything.

  • Loose hinge screws are the most common cause and the easiest to fix.
  • Pack a stripped screw hole with a matchstick and wood glue, then fit a longer screw.
  • A door that rubs at the top on the latch side has usually sagged on its hinges.
  • Wooden doors swell in damp weather, so wait for a dry spell before sanding.
  • On uPVC doors, make small quarter-turn hinge adjustments and retest after each one.
Book a door repair

Why a Door Catches on the Frame and How to Pinpoint It

A door catching on the frame is almost always a sign that something has moved, worn or swollen out of place. Doors of this kind can catch on the frame for a number of reasons, and the good news is that most cases come down to one of seven causes.

Run a Clearance Check Before You Touch Anything

Start by finding exactly where the door rubs. Open the door and look for shiny marks, scuffs or paint worn away on the door edge or the frame.

Next, close the door slowly and watch the gap. A door catching at the top on the latch side points to sagging. A door tight along the whole hinge side points to misalignment or swelling.

  • Top corner rubbing: usually sagging or worn hinges
  • Hinge side tight: frame or door misalignment
  • Bottom edge scraping: dropped hinges or swelling
  • Latch side catching: strike plate or latch problem
  • Whole door stiff: swelling, paint build-up or a dropped mechanism

Now work through the seven causes below in order. They run from the simplest fix to the ones that need a professional.

Use the marks and gaps to narrow down which of the seven causes you are dealing with.

What you see Likely cause
Top corner rubbing Sagging or worn hinges
Hinge side tight Frame or door misalignment
Bottom edge scraping Dropped hinges or swelling
Latch side catching Strike plate or latch problem
Whole door stiff Swelling, paint build-up or dropped mechanism

1. Loose or Worn Hinge Screws

Loose hinge screws are the most common cause of a door catching, and the easiest to fix. When the screws holding a hinge work loose, the door drops slightly and the top corner starts to rub.

Open the door and check each screw with a screwdriver. If a screw turns freely, the hole may be stripped.

How to fix it: tighten every hinge screw, replace any that are stripped, and test the door. If the door still catches, move on to the next cause.

2. Hinges That Are Worn, Bent or Poorly Lubricated

A hinge that is worn, bent or dry will drag and throw the door out of line. Squeaky hinges and rattling doors are early warnings. Left alone, the hinge wears faster and the door sags.

Check each hinge for play by opening the door and gently lifting it. Any movement at the knuckle means wear. A dry hinge will also feel stiff and may squeak.

How to fix it: apply a few drops of suitable lubricant to each hinge and work the door back and forth. If a hinge is bent or badly worn, it needs replacing.

Not sure, or run out of patience? Send us a photo of the lock, handle or door edge on WhatsApp and we will guide you, or call and we can come out. No call-out fee.

3. A Sagging Door Moving on the Hinge Side

A sagging door drops on the hinge side and rubs at the top of the frame on the latch side. This is a movement problem, not a lock problem. The door has shifted, and the gap around it is no longer even.

You can confirm sagging by checking the gap at the top of the door. If it is wider on the hinge side and narrower on the latch side, the door has dropped.

How to fix it: sometimes tightening the top hinge screws is enough. If the sag is set, a hinge shim or washer behind the lower hinge can lift the door back into line.

4. Door and Frame Misalignment

Misalignment means the door and frame no longer sit square to each other.

The hard part is separating door movement from frame movement, because the two look almost identical when you close the door. Work through these checks in order and note what you find.

  • Check the frame for square. Hold a spirit level against the hinge-side leg and the head of the frame. If the frame itself is out of plumb or the head is not level, the frame has moved and hinge adjustment alone will not fix it.
  • Check the frame fixings. Look for gaps opening at the frame-to-wall joint, cracked plaster around the frame, or a frame that rocks when you push it. A frame that moves under hand pressure has loose fixings or failed packing.
  • Check the door for square. Measure both diagonals of the door slab, corner to corner. A door that is out of square has usually dropped or twisted on its hinges rather than the frame moving.
  • Check the gap pattern. An even gap that is simply too tight all round points to swelling or paint build-up. A wedge-shaped gap that is wide at one corner and tight at the opposite one points to movement, either of the door or the frame.
  • Check the surrounding structure. Cracks that run from the frame corners into the plaster, or a door that has started catching after building work or a new roof, suggest structural movement rather than a hinge problem.

How to fix it: if the frame is square and solid but the door is out of square, the door has moved and hinge adjustment or rehanging is the route.

5. Seasonal Swelling Caused by Humidity and Temperature Changes

Wooden doors swell in damp weather and shrink in dry weather.

The tell-tale sign is a door that catches along the whole latch edge or the bottom, with no obvious hinge wear. Damp air swells the timber, and the door grows into the frame.

How to fix it: wait for a dry spell before doing anything drastic. Lightly sanding or planing the door edge can help, but only remove a little at a time.

Watch out: taking too much off a swollen door leaves a gap once it dries out, and that gap can let draughts and water in.

6. A Door Not Closing Properly Because of Latch and Strike Plate Problems

A door not closing properly is often a latch or strike plate issue rather than a door alignment one.

Look at the strike plate on the frame. If the latch is hitting the plate rather than sliding into the recess, you will see scratch marks on the plate or the latch itself.

How to fix it: loosen the strike plate screws and nudge the plate slightly, then retest.

If the door hooks are not engaging when you lock it, the locking points are missing the frame.

7. uPVC Door Alignment and Dropped Mechanisms

uPVC doors do not swell like timber, so a uPVC door catching usually points to alignment or a dropped mechanism. The door has dropped on its hinges, or the multipoint lock gearbox has failed and the locking points no longer line up.

Start by working out which of the two it is, because the repair route is different.

  • Lift test. Open the door and lift it gently at the handle edge. Movement at the hinges, or a hinge that rocks, means the door has dropped on its hinges.
  • Gap test. Close the door and look at the gap around the edge. A gap that is wide at the top on the latch side and tight at the bottom points to hinge drop. An even gap with a door that still will not lock points towards the mechanism.
  • Handle test. A handle that feels loose, springs back without resistance, or turns without the locking points engaging suggests the gearbox or the handle spindle rather than alignment.
  • Locking point test. With the door open, turn the handle and watch the locking points and hooks. If they move freely but miss the frame keeps when the door is closed, the door has dropped. If they do not move at all, the mechanism has failed.
  • Hinge type. Compression hinges on uPVC doors adjust in two or three directions, usually with an Allen key at the hinge. Flag hinges adjust differently. Note which type you have before adjusting anything.

How to fix it: uPVC door alignment is adjusted at the hinges, and it is a job best done with the right tools.

Watch out: over-adjusting a compression hinge can pull the door out of the frame at the top corner and stop the locking points engaging altogether, so adjust in small steps and retest after every change.

When to Call a Professional Locksmith

Call a professional when the door will not lock securely, when the frame has moved, or when you have adjusted the hinges and the door still catches.

DW Locksmiths takes a repair-first approach. The team checks the door, the hinges and the lock mechanism, then agrees the price with you before any work starts.

If your door is catching and you cannot trace the cause, or the lock has stopped working properly, get in touch.

A door that catches today can become a door that will not lock tomorrow. If you have worked through the seven causes and the door still rubs, or the lock feels stiff or loose, it is time to get it looked at properly.

Frequently Asked Questions

Why is my door catching on the frame?

The most common reasons are loose hinge screws, worn or bent hinges, a door that has sagged on the hinge side, and movement between the door and the frame. Seasonal humidity can also swell timber doors so they rub along the top or latch side. Run a clearance check with a piece of paper around the door edge to find the exact contact point before deciding on a repair.

Can humidity make a door stick?

Yes. Timber doors absorb moisture from the air and expand, which is why a door that opens freely in summer can catch in autumn and winter. The effect is usually worst on the top edge and the latch side. Check whether the sticking follows the seasons. If it does, the door may need light sanding along the contact edge rather than hinge adjustment.

Can a misaligned door affect the lock?

It can. When a door drops or the frame shifts, the latch and deadbolt no longer line up with the strike plate. The key may turn stiffly, the door may need lifting to lock, or the latch may not engage at all. Adjusting the hinges or strike plate often restores smooth locking. If the lock itself is damaged, a locksmith can repair or replace the mechanism.

Should I plane a door that is catching?

Only after you have ruled out hinge and frame problems. Planing removes material permanently, so it should be a last resort for a timber door that has swollen. Check hinge screws, hinge condition and frame alignment first. If the door still catches after those checks, plane or sand the contact edge in small stages and repaint the bare timber to protect it.

Related DW Locksmiths services

Get it fixed properly

Call or WhatsApp DW Locksmiths on 07584 198906. No call-out fee, the price is agreed before work starts, and repairs come with a 1-year warranty with no VAT to pay.