Would you rather a locksmith sorted it? DW Locksmiths repairs door, lock and window faults across Houghton-le-Spring, Sunderland, Durham and surrounding areas. No call-out fee, and the price is agreed before work starts.
Quick Summary
The main types of door locks are mortice deadlocks and sashlocks on timber doors, rim locks and nightlatches on back and front doors, and euro cylinder locks and multipoint locks on uPVC and composite doors. Identify yours by checking the door edge, the inside face, the cylinder and the key.
- A mortice lock sits in a pocket cut inside the door edge, with only the faceplate visible.
- A rim lock mounts on the inside door face and its visible cylinder can be snapped.
- A euro cylinder is the removable barrel found on most uPVC and composite doors.
- Lifting the handle and feeling hooks or rollers engage confirms a multipoint system.
- BS 3621 is the British Standard for thief-resistant lock assemblies on final exit doors.
Why Knowing Your Door Lock Type Matters
The global door locks market is forecast to reach $11,238.47 million by the end of 2026, according to Cognitive Market Research's door locks market report, and that growth is driven by homeowners replacing tired hardware with better-specified locks.
Here's the practical problem. A euro cylinder, a mortice deadlock and a multipoint gearbox all fail in different ways and need different fixes. If you can't name what's on your door, you can't describe the fault to anyone, and you can't check whether a replacement meets your insurance terms.
The Main Types of Door Locks Explained
Most homes have one of three lock families on their external doors.
| Lock type | Where it's usually fitted | How it locks | Typical weakness |
|---|---|---|---|
| Mortice deadlock | Timber front doors | Key-operated bolt into the frame | Needs a deep pocket cut in the door edge |
| Rim lock / nightlatch | Timber back and front doors | Surface-mounted latch with a bolt | Visible cylinder can be snapped |
| Euro cylinder lock | uPVC and composite doors | Key turns a cylinder plug | Poor-quality cylinders snap |
| Multipoint lock | uPVC and composite doors | Levers and hooks along the door edge | Gearbox failure stops all locking points |
Mortice Locks and Deadlocks
A mortice lock is a lock body set into a pocket cut inside the door edge, so only the faceplate is visible. A mortice deadlock has no latch, just a bolt thrown by the key.
These remain the benchmark for reliability. As Simons-Voss note on traditional versus smart locking points out, mortice locks are still the most widely used and trusted option for standard entrance and internal doors. The trade-off is fitting: a mortice lock needs a properly cut pocket, and a badly fitted one drags, jams or lets the door sag around it.
Rim Locks and Nightlatches
A rim lock mounts on the inside face of the door rather than inside it, and a nightlatch is the classic example. You lift the latch to get out and need the key to get back in, which is why they're so common on back doors.
They're quick to fit and easy to replace, which makes them popular with landlords. The weak point is the cylinder, which sits proud of the door and can be attacked.
Euro Cylinder Locks
A euro cylinder is the removable barrel that sits through the door and turns the locking mechanism, found on the vast majority of uPVC and composite doors. The cylinder plug holds the pins that match your key profile, and the whole barrel slides out once the retaining screw is removed.
Cylinder quality decides how well the door resists attack. Anti-snap, anti-drill and anti-bump cylinders are built to resist the methods thieves actually use, and a cheap cylinder undermines an otherwise solid door.
uPVC Door Lock Types and What Fits Your Door
uPVC and composite doors almost always use a multipoint locking system driven by a euro cylinder, so the cylinder is the part you see and the mechanism is the part that does the work. Fitting the wrong cylinder length leaves it proud of the door or catches the mechanism, and that's where most "my door won't lock" calls start.
Not sure, or run out of patience? Send us a photo of the lock, handle or door edge on WhatsApp and we will guide you, or call and we can come out. No call-out fee.
How to Identify a Door Lock in Four Steps
Identifying a door lock takes about two minutes with a torch and a screwdriver, but the four checks below are ordered so that each one narrows the field. Work through them in sequence and you will land on the lock family, the likely mechanism, and the part that usually fails.
- Look at the door edge first. Open the door and shine the torch along the edge. A single metal faceplate with one rectangular opening is a mortice lock. A faceplate with several cut-outs, hooks, rollers, pins or bolts, running top to bottom is a multipoint lock. A door with no faceplate at all but a surface-mounted box on the inside face is a rim lock or nightlatch.
- Check the inside face. A box screwed to the door face with a latch and a key cylinder is a rim lock. A flush door with a handle and a separate keyhole, and no visible box, is almost certainly a mortice or multipoint system.
- Find and measure the cylinder. A round barrel through the door with a keyway is a euro cylinder. Note whether it sits flush with the door face, proud of it, or recessed. A cylinder that protrudes is a snap risk; one that is recessed too far can bind the mechanism. Measure the distance from the centre screw to each end of the cylinder, this is the measurement you will need if you replace it.
- Test the handle and the key. Lift the handle. If it rises and you feel hooks or rollers engage, you have a multipoint system. If the handle only latches and the key throws a single bolt, it is a mortice lock. If the key turns but nothing moves, the gearbox or the bolt is the fault, not the cylinder.
Watch out: a cylinder can look flush but still be the wrong length for the door, and a replacement bought on appearance alone will either sit proud or catch the mechanism. Always measure before you buy.
Match the Key Profile to the Lock
The shape of the key is a quick confirmation. A standard Yale-type key with a flat blade and a single row of cuts points to a rim lock or a basic cylinder. A larger key with cuts on both edges is usually a euro cylinder. A long, heavy key with a complex profile is typical of a higher-security cylinder or a multipoint system. Dimple keys, with circular depressions rather than edge cuts, indicate a dimple cylinder, which is common on newer composite doors.
Use the Door Edge Profile as a Tie-Breaker
If the key and the cylinder leave you unsure, the door edge settles it. A timber door with a narrow faceplate and a single bolt is a mortice deadlock or sashlock.
If the four steps leave you still unsure, or the lock is sticking or not throwing the bolt, our uPVC and composite door lock repair team can identify it on site and quote before any work starts.
What a Multipoint Door Lock Does Differently
A multipoint door lock secures the door at several points along the edge, not just one. Lifting the lever handle drives hooks and rollers into the frame at the top, middle and bottom, which spreads the load and makes the door far harder to force.
The weak link is the gearbox, the unit inside the door that transfers handle and key movement to all those locking points.
BS 3621 and Insurance: What Your Lock Needs to Meet
BS 3621 is the British Standard for thief-resistant lock assemblies, and it is the benchmark insurers and surveyors look for on a final exit door. A lock meeting BS 3621 resists drilling, picking and forcing, and the standard sets requirements for the bolt, the cylinder and the whole assembly rather than the parts in isolation.
Insurance Compliance Checklist
Work through these checks before you assume your lock meets your policy. If any answer is no, the lock may not comply.
- Has the lock been changed since the policy started? A replacement lock that does not meet the stated standard can void a claim.
- Is there a record of the lock specification? Keep the receipt or the locksmith's specification sheet with your policy documents.
What to Do If Your Lock Does Not Comply
If the checklist flags a gap, the fix is usually a cylinder upgrade rather than a new door. If you are unsure whether your lock complies, ask before you spend, our uPVC and composite door lock repair team can check the specification against your policy wording and quote before any work begins.
When Door Lock Repair Beats Replacement
Repair is often the better option, and a repair-first approach can save money. A stiff handle, a dropped latch or a cylinder that turns but doesn't throw the bolt is usually a mechanism fault, not a reason to change the whole door.
Replacement makes sense when the door structure is damaged, the mechanism is obsolete, or the lock simply doesn't meet your insurance requirement.
Book a Lock Check or Repair Visit
If you've identified your lock and it's sticking, not throwing the bolt, or failing to meet your insurance terms, the next step is a proper look at it.
Send us a photo of your door edge and cylinder on WhatsApp and we'll tell you what you're looking at and what it needs.
Frequently Asked Questions
What are the most common types of door locks in UK homes?
Most homes have one of four setups: a mortice deadlock or sashlock on a timber door, a rim lock or nightlatch on an older front door, a euro cylinder in a uPVC or composite door, or a multipoint lock running the full height of the door edge. Composite and uPVC doors usually combine a euro cylinder with a multipoint mechanism. Knowing which you have decides what replacement parts fit and whether your door meets the lock standard your insurer expects.
How do I identify the type of lock on my door?
Start with the door material: timber doors usually take mortice or rim locks, while uPVC and composite doors take euro cylinders and multipoint mechanisms. Look at the door edge for a faceplate and bolts, check whether the keyway sits in a round barrel or a flat plate, and test whether one turn throws several bolts or just one. If the lock is stiff or the door has dropped, a locksmith can confirm the type and whether door lock repair is viable before you buy anything.
Are multipoint door locks more secure than standard locks?
A multipoint door lock throws several bolts along the door edge from one key turn, which spreads force across the frame and makes prising harder. That makes it more resistant than a single deadlock on the same door. Security still depends on the cylinder: a multipoint lock fitted with a basic euro cylinder can be the weak point, so pair it with an anti-snap, anti-drill cylinder and confirm the assembly meets BS 3621 where your insurance requires it.
When should a door lock be repaired rather than replaced?
Repair usually wins when the mechanism is stiff, the door has dropped, the handle is loose, or a single component such as the cylinder or gearbox has failed while the rest of the lock is sound. Replacement makes more sense when the lock body is corroded through, the door has been forced, or the existing hardware cannot meet the standard your insurer asks for. A repair-first assessment avoids paying for a full door when a cylinder or mechanism swap solves the problem.
Related DW Locksmiths services
Get it fixed properly
Call or WhatsApp DW Locksmiths on 07584 198906. No call-out fee, the price is agreed before work starts, and repairs come with a 1-year warranty with no VAT to pay.